High accuracy pressure gauge for portable use to check and test theme park ride pneumatic air control systems,
An absolute pressure sensor for ship use to measure seawater depth on a ferry hull draft monitoring system over a range of 0 to 3 bar abs from the G1 1/2" process connection, and sending the corresponding 4-20mA signal through the waterproof cable electrical connection.
Economical corrosion resistant ceramic diaphragm pressure sensor for measuring over a 0 to 3 bar gauge pressure range and generating a 4 to 20 milliamps output signal.
An absolute pressure sensor for research use to measure pressure of natural gas over a range of 0 to 45 psi absolute from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the integral cable electrical connection.
Low cost stainless steel 316L submersible freshwater level sensor and RTD temperature sensor for measuring water well level over a 0 to 30 mH2O gauge hydrostatic pressure range and sending out a 4 to 20 milliamps signal.
0…30 mH2O or 0…100 ftH2O liquid level range, 4…20 mA, 0…10 V, or 0…5 V output signal hydrostatic liquid level sensors.
0…3 bar or 0…45 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
0…3 bar, 0…45 psi, 0…3 kg/cm2, or 0…300 kPa pressure range, 4…20 mA output signal pressure sensors.
This low price hi-temp pressure sensor can be custom scaled to measure steam over 0 to 40 psi g range and provide a 4 to 20 milliamp current output signal.
PR 33X is a high resolution digital interface pressure sensor that can be hooked up to a Windows PC to display and log the pressure. The 33X uses a high resolution 16 bit analog to digital converter to process the signal generated by the pressure transducer, and therefore it is possible to detect very small variations in pressure.
We’re looking for a hydrostatic level transmitter which is resistant to acids & chemicals including Chlorine & ferric chloride acid (FeCl3) dissolved in water
I need to measure pressure drop in a leaking system. The initial pressure is 3 bar and I need to measure the pressure drop over a few seconds
Differential pressure sensor with all Hastelloy C276 diaphragms and process connections which are highly resistant to sea water corrosion
Pressure transmitter for sea water with pressure range of 0 – 3 kg/cm², SST316L body material, ceramic diaphragm sensing material, 1/2 in NPT pressure connection, 4-20 mA output signal and 24 Vdc power supply input. DMK457 Seawater Pressure Transmitter Pressure range: 0 to 3 kg/cm2 g Electrical Connection: DIN-43650 plug IP65 Pressure Connection: 1/2 NPT […]
Small diameter pressure sensor of lowering inside a 20mm pipe to monitor water depth 30 metres below ground level.
Cost effective pressure transducers to connect to data logger for diesel engine testing. These transducers can be used to measure the pressures of air, diesel, coolant and oil for testing purposes. The pressure transducers will accept a 5V excitation voltage and will produce a 0.5-4.5V out. IMP Low Cost Pressure Transducer Datum: Gauge (G) Pressure […]
Checking vacuum pressure as a positive pressure and also as a negative pressure depending on the type of vacuum equipment being tested
I am looking for a 4-20mA output DP sensor with a -1 to 3 bar differential range for use on water. The sensor will need to withstand an overpressure of 20 bar on the positive side and 1.5 bar on the negative side.