0…250 mbar or 0…4 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
250 mbar
250 mbar, 4 psi, 100 inH2O, 25 kPa Range 4-20 mA Output Pressure Sensors
0…250 mbar, 0…4 psi, 0…100 inH2O, or 0…25 kPa pressure range, 4…20 mA output signal pressure sensors.
100 inH2Og 4-20mA low concentration acid solution pressure sensor for CIP cleaning
A food grade gauge pressure sensor for CIP cleaning process use to measure pressure of low concentration acid solution over a range of 0 to 100 inH2O g from the dairy pipe process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
250cm range 0-10Vdc output plastic submersible chemical tank level sensor
A plastic submersible liquid level sensor for submerging in a chemical tank and measuring the depth over a range of 0 to 250cm from the nose cone, and sending the corresponding 0-10Vdc signal through the submersible FEP coated cable electrical connection.
Negative 250mbarg range 4-20mA out suction range pressure sensor
Economical stainless steel diaphragm suction range pressure sensor with semiconductor strain gauges for measuring over a 0 to -250 mbar gauge pressure range and generating a 4 to 20 milliamps output signal.
2.5 mH2O range 0-10V signal submersible diesel level sensor
Low cost stainless steel 316L submersible diesel level sensor with silicon strain gauge technology for measuring over a 2.5 mH2O gauge hydrostatic pressure range and sending out a 0 to 10 volts signal.
2.5 mH2O, 8 ftH2O Range 4-20 mA, 0-10 V, 0-5 V Output Hydrostatic Liquid Level Sensors
0…2.5 mH2O or 0…8 ftH2O liquid level range, 4…20 mA, 0…10 V, or 0…5 V output signal hydrostatic liquid level sensors.
Wastewater holding tank submersible 8 feet deep level monitoring pressure transmitter
Submersible pressure transmitter with a flush diaphragm & intrinsic safety approval for measuring the level of wastewater in a holding tank which is 8 feet high.
1-5Vdc output, 2.5m range, salt water ballast tank level sensor
We want a 1-5Vdc output submersible pressure sensor which is seawater compatible to monitor the level of a salt water ballast tank over a range of 0 to 2.5 metres.
Landfill leachate 2.5 mWG range level sensor with 5 volt output
What submersible sensor to measure 0-2.5mWG level of landfill leachate with a 0-5Vdc output?
Air blower 100 inWG range differential pressure transducer
Differential air pressure transducer for air blower system to monitor pressures over the range of 0 to 100 inches of water with a 0 to 10 volt output.
2.5 metre water level transmitter for submersing inside underground tank
Tank depth sensor for an underground cylindrical rain water collection tank which is 2.5 metres tall.
Submersible diesel fuel tank level sensor with 5V out for 7ft height
Diesel fuel oil tank level sensor with 0 to 5 volt analog output signal for measuring contents in storage tanks up to 7 feet in height.
Low power consumption fuel tank level sensor
IMTG is a low cost OEM submersible level transmitter which is typically used in applications that require diesel fuel level measurement in small tanks.