0…25 bar or 0…350 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
25 bar
25 bar gauge range ratiometric 0.5 to 4.5 volts output ceramic diaphragm pressure sensor
Economical corrosion resistant ceramic diaphragm pressure sensor for measuring over a 0 to 25 bar gauge pressure range and generating a ratiometric 0.5 to 4.5 volts output signal.
25 bar, 350 psi, 25 kg/cm2, 2.5 MPa Range 4-20 mA Output Pressure Sensors
0…25 bar, 0…350 psi, 0…25 kg/cm2, or 0…2.5 MPa pressure range, 4…20 mA output signal pressure sensors.
Adjustable recording time 300 psi water pressure data logger with 1/4″NPT fitting
Water pressure data logger that can handle 0 – 300 psi, with adjustable recording time interval and a direct connection via a 1/4″ NPT fitting
Fire hydrant flushing water pressure data logger
Pressure data logger that can be used in a city municipal water supply system to monitor pressure changes when fire hydrants are flushed
25 kg/cm2 high temperature steam pressure transmitter
High temperature pressure transmitter for measuring steam pressures from 0 to 25 kg/cm² .
Replacement for obsolete PA-21SC 25 bar pressure transmitter
The PA21SC is now obsolete and has been replaced by the 21Y.
Diaphragm sealed high temperature pressure transmitter for -1 to 25 kg/cm²
Diaphragm sealed pressure transmitter for measuring over -1 to 25 kg/cm² on liquid with a flush type diaphragm up to a temperature of 190°C.
Spot-check pressure gauge tester for ranges up to 350 psi
Simple to use and low cost spot check pressure gauge tester for checking pressure gauges in the range of 0-350 psi max and with a 1% accuracy. PGS40 Pressure Gauge Tester Pump Kit Options: Pump, hose, BSP and NPT adpt, case Dial Test Gauges (1% acc): 25 barg/365 psig
25 bar g pressure data logger with software and USB interface
Single channel pressure datalogger in-built pressure sensor, internal data storage memory and battery power for measuring pressure up to 25 bar gauge.
200 degC media temperature pressure sensor with 25 bar g range and 0 to 10 volts output
High temperature pressure transducer with 0-10V amplified output, 0-25 bar gauge pressure range and compatibility with a media temperature up to 200 degC (392 degF)
Water depth and temperature transmitter for 700 foot deep borehole
I want to measure water depth and temperature in a bore hole to a depth pressure of 700 ftH2O.
Datalogging pressure gauge to use in hazardous zone 1 to measure 0 to 400 psig
We would like the instruments to be able to record / store pressures for subsequent retrieval with a handheld or laptop computer via the USB port.