Device for level sensing in a wash water tank used for the dairy industry, which has a short term working temperature rating up to 100 deg Celsius.
A brewery grade externally mounted liquid level sensor for measuring the height of beer over a range of 0 to 2,000mm from the triclamp process connection, and sending the corresponding 0-5Vdc signal through the CIP cleaning proof cable electrical connection.
A digital display, pressure sensor and digital interface module package for use on portable data acquisition trolleys to measure pressure of air over a range of -20 to 20 kPa diff from two 6.6mm dia x 11mm barbed hose connections, and sending the corresponding reading via a RS485 Modbus RTU interface through the terminal block connector electrical connections.
An externally mounted liquid level transmitter for measuring the height of wastewater in a grease trap waste receiving tank over a range of 0 to 2m from the G1 1/2 flush diaphragm process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
A low range gauge pressure sensor for building system boiler heating use to measure pressure of natural gas over a range of 0 to 3 psi g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
A high accuracy low bi-directional range differential pressure transmitter for water treatment use to measure pressure of air over a range of -3 to 3 psi differential from two 1/4”-18 NPT internal process connections, and sending the corresponding 4-20mA signal through the 1/2" NPT internal cable gland electrical connection.
Economical stainless steel diaphragm pressure sensor with semiconductor strain gauges for measuring over a 0 to -200 mbar negative gauge suction range and generating a 4 to 20 milliamps output signal.
A submersible water temperature and depth sensor for submerging in a road flood stream and measuring the depth over a range of 0 to 200cm from the nose cone, and sending the corresponding 0-5Vdc signal through the submersible cable electrical connection.
A submersible water level sensor for submerging in a lake and measuring the depth over a range of 0 to 2m from the nose cone, and sending the corresponding SDI-12 signal through the submersible cable electrical connection.
Digital display negative differential pressure gauge and sensor for use in vacuum air measurement applications, capable of measuring 0 to 20 kPa DP with 1% accuracy and connected using a 6.6 x 11 mm tube fitting.
A low range gauge pressure sensor for building management use to measure pressure of natural gas or propane on building heaters over a range of 0 to 3 psi g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the integral cable electrical connection.
Compound range pressure transmitter for monitoring under pressure down to -10 millibar gauge and an over pressure of up to 200 millibar, with an output scaled from 4 to 20 milliamps with 4mA = -10mbar, and 20mA = +200mbar.
Economical stainless steel diaphragm pressure sensor with semiconductor strain gauges for measuring over a 0 to 2 mH2O gauge hydrostatic range and generating a ratiometric 0.5 to 4.5 volts output signal.
0…2 mH2O or 0…6 ftH2O liquid level range, 4…20 mA, 0…10 V, or 0…5 V output signal hydrostatic liquid level sensors.
0…200 mbar or 0…3 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
200 mbar range hydrostatic level sensor for measuring the quantity of generator fuel oil in a day tank.
Digital pressure sensor with a 0…200 mbar gauge range for connecting at multiple points on one RS485 serial line.
Marine approved hydrostatic liquid level sensor for mounting on the base of an onboard 2 metre high diesel tank to monitor fuel usage.
0…200 mbar, 0…3 psi, 0…80 inH2O, or 0…20 kPa pressure range, 4…20 mA output signal pressure sensors.
Cost effective level sensor 0 – 2m, media is diesel fuel, output is 0-10V
I’m looking for a stick type pressure transmitter ranged -200mbarg to +200mbarg with a 4-20mA output, a 1/2″BSPT pressure connector and DIN43650 electrical connection, would you be able to help with this item? We would suggest the IMP-LR which is a low pressure transmitter which can be scaled as a compound range over the 4-20mA output span. […]
The IMTG is specifically designed for large quantity OEM customers which manufacture and install content management systems for fuel storage tanks.
Fuel oil pressure sensor with a 4-20mA current output and a submersible electrical connection for lowering inside a Diesel fuel storage tank to measure hydrostatic level of fuel oil up to 200 millbar.
Submersible pressure sensor with 0 – 0.2 bar range for measuring the level of a 2 metre deep fuel oil storage tank.
Water level indicator for a 2 metre deep rain water storage tank located underground.
Submersible diesel level pressure sensor for installing in the bottom of tanks up to 2 metres deep.
Tank level sensor to measure tank height of hot oil up to 2 meters at a maximum temperature of 200 degC.
Fresh water submersible pressure sensor with 4-20mA output for measuring 0 to 2m of fresh water depth.
4 to 20 milliamp output submersible wastewater pressure sensor for installing on 1/2 BSP thread pipe fitting
Fresh water level sensor for submersing in rivers with a hydrostatic pressure range for measuring water depth up to 2 metres.
We are searching for a transducer for to monitor water in an upland bog