DP transmitter for measuring pressure difference between two pressure points which can tolerate up a very high overload pressure independently on either the positive or negative side port or both together at the same time.
Sensor Product Details, Specs & Data Sheets
Find sensor, probe, transducer and transmitter product details for converting physical measurements into electrical signals
Low range digital interface submersible liquid level probe with RS 485 Modbus RTU protocol serial bus communications for measuring level of fuel, oil and wastewater in low fill height open tanks.
22mm diameter digital interface submersible liquid level probe with RS 485 Modbus RTU protocol serial bus communications for installing in 1″ diameter tubes to measure groundwater level and measuring wastewater with nose cone removed.
Submersible 4-20mA output sensing probe for immersion in freshwater, seawater or any other compatible liquid to measure liquid temperature.
Submersible stainless steel pressure transmitter ideal for geotechnical surveying with a 19mm diameter for measuring hydrostatic water level in bore-holes.
Digital submersible stainless steel liquid level sensor with a Modbus RTU protocol RS 485 serial bus interface.
A 22mm diameter titanium body seawater depth and level probe with a 4-20mA output with Lloyds and DNV-GL ship approval, for monitoring the quantity of ballast or the draft of a ship’s hull.
Combined temperature probe and pressure sensor for mounting on a single pressure port to measure over a temperature range of -50 to +200C (-58 to +392F), and pressure ranges from 0…4 bar g up to 0…600 bar g.
CANopen DIISO 11898 and ISO J1939 protocol digital interface pressure sensor for measuring pressures over a range of 0…0.2 bar up to 0…5000 bar.
Compact robust all welded stainless steel pressure sensor for heavy duty hydraulic system applications.
The IC-LTM is a customisable fluid flow meter which can be adapted to a oem liquid flow application with an extensive choice of mechanical process fittings, electrical connections, displays and output signals to measure flow speed or flow rate and use as a totaliser.
The IC-LPM is a customisable fluid flow paddle wheel flowmeter which can be adapted to a oem liquid flow application with an extensive choice of mechanical process fittings, electrical connections, displays and output signals to measure flow speed or flow rate and use as a totaliser.
The IC-FMS is an industrial paddle wheel flow meter specifically designed for measuring the flow rate of liquids.
Low cost OEM diesel fuel or water level sensor for installing inside or outside a storage tank.
USB ready digital pressure sensor for recording pressures with a high speed sample rate of up to 1 kHz to a computer. The UPS-HSR is supplied with a 2m long USB cable, PC software and case. Choose a pressure range from 2.5 bar up to 5000 bar with a G1/4 or 1/4 NPT male up to 1500 bar, and AE F-250-C female up to 5000 bar.
All welded stainless steel IO-Link interface pressure sensor with a low profile for use by mobile hydraulics manufacturers to measure hydraulic pressures up to 600 bar or 9000 psi.
The PrimAtü 10 low cost low range differential air pressure transducer can detect and display both positive and negative differential pressure variations of very low low pressure ranges from 0.5 up to 1000 mbar/hPa, and output the pressure as a 4-20mA, 0-20mA or a 0-10Vdc analog output.
The Gefran KX pressure sensor is ATEX Ex nA non-sparking approved for use in zone 2 hazardous areas with flammable gas or dust atmospheres, and is SIL 2 approved for additional safety. The KX is available in ranges from -1 to 1 bar up to 1000 bar.
The new DAC series allows accurate recording of measured values in extreme situations, such as pressure spikes or pressure surges, pressure gradients during explosions or combustions, e.g. in the case of ballistic measurements or the ignition of internal combustion engines.
The DPS 300 is a low range HVAC differential pressure sensor for measuring pressure drops across air filters and airflow through and between ventilation ducts. The lowest possible pressure range is 0…100 pascals and the highest is 0…1000 millibars. User switchable 2 or 3 pressure ranges and volts or current output are included with most standard configurations.
All welded stainless steel diaphragm pressure sensor for mobile hydraulics, refrigeration or oxygen applications. This pressure sensor is available in the ranges from 6 bar up to 600 bar gauge with a 4-20mA or 0-10Vdc output signal.
Sea water corrosion resistant low range pressure transmitter for marine, ship and offshore engineering.
Groundwater, tank & reservoir water level detachable submersible cable hydrostatic liquid level sensor for multiple municipal water level measurement locations.
Pressurised tank liquid level differential pressure cell transmitter for process plant storage.
Pressure sensor elements with sensing diaphragms made from alumina ceramic (Al2O3) for electronic & mechanical oem integration into measurement & control instrumentation designs.
The Gefran KHC Series is a compact pressure sensor with a CANopen digital interface for use with vehicle digital networks. The KHC CANopen DS404 coms protocol pressure sensor is available in pressure ranges from 0-1 bar up to 0-1000 bar gauge.
The Gefran KS Series is a small size oil free all stainless steel pressure sensor with SIL2 certification for incorporating into the design of industrial automation machinery. The KS compact SIL2 approved pressure sensor is available in ranges from 0-1 bar up to 0-1000 bar gauge
The Gefran KH mobile hydraulics pressure sensor is a low cost compact stainless steel high pressure sensor for use in large quantity OEM applications on mobile vehicles. The KX is available in ranges from 4 bar / 60 psi up to 1000 bar / 15000 psi.
The Gefran KX pressure sensor is ATEX approved for use with intrinsic safety barriers in hazardous areas, and is SIL 2 approved for additional safety. The KX is available in ranges from -1 to 1 bar up to 1000 bar.
The TPFAS pressure sensor has a small size flush diaphragm which allows the use of a smaller size G1/4 (1/4 BSP) or M10 x 1 male thread for fitting where there is limited room or access to the process measurement point.
Gefran melt pressure transducers & transmitters for plastic extrusion, injection moulding & blow moulding applications. Find a pressure sensor here for use on highly viscous media at high temperatures.
The 36 X W is a high accuracy sensor with analogue 4-20mA / 0-10Vdc or digital RS485 output for submersing into a liquid to measure depth.
A wireless interface system for connecting battery powered sensors to a computer via a central receiver.
The DCT 531 digital pressure sensor has a Modbus RTU RS485 interface for transmitting pressure readings over a digital sensor network.
The DCT 533 digital pressure sensor has a IO-Link point-to-point communications interface for sending pressure readings to a IO-Link master.
The DCT532 I²C pressure sensor has a I²C serial computer bus protocol interface for sending pressure readings over addressable digital communications.
Pressure sensor for applications in bio-reactors or autoclaves. The transmitter is compensated up to 150 °C and may be operated continuously or sterilised at this level, including the conditioning electronics up to 120°C.
Water resistant pressure sensor for measuring hydrostatic pressures in the range of 0-0.5 mWC up to 0-100 mWC.
High frequency response pressure sensor with a better than 0.5 millisecond response time and internal digital signal conditioning that samples readings at a rate of 10 kilohertz.
Rugged and easily cleanable pressure/level sensor for use with waste water sewage or sludge.
The chemical resistant LMK806 submersible level probe is designed for use in confined spaces with aggressive media.
Intrinsically safe liquid & gas resistant low range pressure gauge reference pressure sensor for CHP, biogas and landfill sites.
The 35X HTC high temperature digital pressure sensor is suited for media temperatures up to 300 °C
Stainless steel 316L waterproof probe for measuring both water temperature and depth and generating two separate 4-20mA current loop measurement signals.
Ceramic diaphragm diaphragm based pressure sensor, indicator & electronic switch with pressure ranges from 0-0.4 bar up to 0-600 bar.
DMP343 pneumatic pressure sensor for measuring very low range pressures on pneumatic control systems, heating, ventilation and air conditioning systems (HVAC) .
Economical IP68 protected sensor with stainless steel 316L housing and Ceramic strain gauge sensing diaphragm for measuring liquid depth pressure.
Three in one electronic pressure switch, digital pressure gauge and pressure sensor with pressure ranges from 100 mbar up to 600 bar (1.5 to 9000 psi).
IP68 protect pressure sensor for monitoring potable water level to depths of 100 metres.
Current output pressure transducer for measurement ranges from 0 to 2000 (30000 psi) range up to a maximum range of 6000 bar (90000 psi).
Small size dp sensor for measuring differential air pressure on HVAC, compress air and pneumatic control systems.
Stainless steel pressure transmitter with ranges from 100mbar up to 40 bar gauge or absolute. Special options for ATEX , SIL2 and compound ranges.
Versatile low price pressure sensor with a wide selection of electrical and mechanical options for customisation.
High pressure transducer for pressure testing applications with pressure ranges from 0…4 bar (60 psi) up to 0…1000 bar (15,000 psi) gauge with a measurement accuracy of 0.1%.
Ultra low differential pressure transmitter for HVAC applications with 4-20mA current loop or amplified voltage output signal in pressure ranges from 0.1 mb up to 1 bar differential.
High precision pressure transmitter with an accuracy of 0.1%FS BSL NLHR and digitally adjustable pressure ranges from 400mb up to 40 bar gauge & absolute.
Low cost sensor for measuring small pressure ranges from 0-50 mbar (10 inH2O) to 0-1000 mbar (15 psi) of liquids or gases.
MTM3000 Miniature Level Sensor specially designed for inserting down very small boreholes in wells, dams and many geophysical research applications.
The ASL low cost miniature pressure transmitter, has a piezoresistive ceramic pressure sensor which is chemically inert and has very fast dynamic response.
This pressure transmitter can be supplied with a PVDF process connector so that it can be used to measure the pressure of acids and other corrosive chemicals.
The IMP industrial pressure sensor, has a piezo‐resisitive ceramic pressure sensor giving it excellent media compatibility
The PT Series Miniature Pneumatic Pressure Transmitter has been designed specifically for measuring pressures in paper mills and similar process industries where the plugging of gauges and seals is a particular concern. Product Description The small, 1” diameter of the transmitter permits installation to be flush with the inside wall of pipes 2” in diameter […]
Submersible level transmitter for measuring liquid level with a 4-20mA current loop or a 0-10V voltage output plus optional ATEX approval for intrinsically safe use in hazardous areas in ranges from 1mH2O up to 250mH2O. The LMP307 is suitable for use on potable water with no leaching, and can be supplied with a drinking water certificate according to DVGW and KTW.
IP68 combined liquid level and temperature, dual 4 to 20 milliamp output pressure sensor with a 316L or Marine Bronze housing.
Economical pressure transducer for monitoring fluid level inside a tank where there is no external mounting point at the bottom of the tank.
Differential air pressure sensor with a 10 volt or a 4-20mA output for building ventilation applications. Ranges from 0 to 6 mbar up to 0 to 1000 mbar.
High pressure sensor, electronic switch and digital gauge with an all welded stainless steel flush diaphragm for high viscosity liquids.
All in one electronic switch, gauge and sensor designed specifically for use in the food, drink and biomedical industry for measuring process pressures.
Analogue output sensor for immersing in seawater to determine depth or change in water level by measuring hydrostatic pressure.
SDI-12 protocol transducer for sensing water depth level and temperature in seawater, brackish water, tidal water, saline water or leachate.
Combined pressure and temperature sensor with a 1200 baud rate serial data interface as defined by the SDI-12 support group.
1/2 inch diameter sensor for measuring both temperature and pressure in one device.
Miniature size 1/2 inch diameter stainless steel pressure sensor with an amplified 0.5 to 4.5 Vdc output. Pressure ranges start from 10 up to 400 bar.
Process transmitter for measuring vacuum, steam, food, pharmaceutical, oil, gas and other pressure readings necessary for the monitoring and control of bulk production processes.
Rangeable DP Cell current loop process transmitter for monitoring differential pressures in a heavy duty process plant environment.
Wet wet differential pressure sensor with a high overpressure rating on both positive and negative pressure side for protection against damage.
High performance transducer with adjustable scaling for modifying the pressure range for different applications. Ranges from 0-60 bar up to 0-600 bar.
DMP 334 is a high range pressure transducer designed for measuring hydraulic pressures up to 2200 bar (32,000 psi) .
The DMP 333 is a stainless steel 316L wetted parts pressure sensor for high pressure ranges on applications such as hydraulic test benches, presses, and hydraulic actuation.
Marine approved level transmitter with 4-20mA output for measuring level of contents inside ship ballast, fuel, liquid cargo or wastewater tanks
Passive compensated pressure transducer with a four arm semiconductor Wheatstone bridge circuit which produces a 100 millivolt with a 10 volt excitation.
All stainless steel compact temperature transmitter with integrated Platinum resistance thermometer (PT100), Measure any temperature -50 to 150 degC.
Dual analogue output signal transmitter for simultaneous measurement of media pressure and temperature. Pressure 100mb – 1000bar and temp -25 – 100 DegC.
All Titanium submersible pressure transmitter for measuring the hydrostatic level of leachate, brackish water or sea water. Ranges from 1 up to 250mWC.
LCD digital pressure gauge powered externally by a 2 wire series 4-20mA current loop or a digital interface.
Highly accurate digitally compensated pressure transducer with G1/2 male flush pressure port.
ATEX certified flame proof pressure transmitter with an open face pressure connection for use with pharmaceuticals or high viscosity media.
Digital pressure sensor with 3 separate channels for measuring P1, P2 and DP readings plus 2 temperature channels.
Rangeable Pressure Transmitter with a hygienic all stainless steel construction with LCD digital readout display and optional HART communications.
High precision pressure transmitter for measuring very low vented gauge reference or differential air pressures. Rangeable 4-20mA or 0-10 volt output.
Low pressure sensor with a USB, RS232 or RS485 digital output interface for measuring low range gauge or differential pressures from 10 to 300 mbar.
Absolute reference hydrostatic depth sensor with an IP68 sealed electrical interface, SS316L, Duplex or PVC housing and a mV, voltage or current output.
Millivolt strain gauge output signal hydrostatic level sensor with an IP68 sealed electrical connection, stainless steel 316L, Duplex or PVC housing.
Low range three in one pressure switch, pressure indicator and pressure sensor for use on pneumatics and HVAC applications.
Three in one hydrostatic level switch, digital level gauge and level sensor with level ranges from 1 mWG up to 600 mWG (3.3 to 1969 ftWG).
IP68 sealed hydrostatic level transmitter with a 17mm diameter for lowering into ground water boreholes for environmental monitoring of water level.
Submersible waste water level sensor with optional intrinsic safety certification for monitoring the level of sewage and effluent in water treatment plants.
Submersible Low Range waste water level transmitter with intrinsically safe option for monitoring the level of sewage and effluent in water treatment plants.
High precision differential pressure transducer with accuracy of 0.1% full scale. Available with RS485, USB or RS232 for connecting to a computer.
High precision pressure transducer with an accuracy of 0.05% full scale with a RS485, USB or RS232 digital interface for connecting to a PC.