| Calculate Altitude & Pressure Parameters | |
|---|---|
| Select Answer Mode |
|
Click save settings to reload page with unique web page address for bookmarking and sharing the current tool settings
Change the answer mode for this tool by selecting altitude (H), altitiude difference (ΔH), pressure (P), or pressure difference (ΔP) as the parameter to calculate instead
Featured atmospheric pressure measurement products
DMP331 Precision Pressure Transmitter - Stainless steel pressure transmitter with ranges from 100mbar up to 40 bar gauge or absolute. Special options for ATEX , SIL2 and compound ranges.
Near-atmospheric pressure transmitter for hazardous gas test chambers - Intrinsically safe pressure transmitter configured for a narrow, sub-atmospheric range to safely monitor dangerous gases in a test chamber.
Related Tools
- US Standard Atmosphere Altitude and Pressure Calculator
- Pressure unit conversion
- Height unit conversion
User Guide
This tool which is based on the icao standard atmosphere model will calculate the air pressure at a height above or below sea level, the altitude from the atmospheric air pressure at the same level, the pressure difference between two altitudes, and the altitude difference between two atmospheric pressures.
The method and formulas used are based on the ICAO Standard Atmosphere 1993 model for use from a height of 5000 metres below mean sea level up to a height of 80,000 metres above mean sea level. The atmospheric model assumes the air is a dry ideal gas, with an atmospheric pressure of 101325 Pa and a temperature of 288.15 K at mean sea level.
In reality the atmospheric pressure, temperature & humidity level in the air are constantly changing, therefore the accuracy in determining the true altitude is limited by this. However despite the dynamic nature of the atmosphere, standard atmosphere models serve as a way of standardising measuring instruments. If every measurement instrument is calibrated with the same atmospheric model the readings can be directly compared.
Featured vacuum range absolute pressure measurement products
60 psi / 4 bar Low Pressure Calibration Pump – ADT912 - Set precise calibration air pressures from 95% vacuum up to 4 bar / 60 psi.
Vacuum digital gauge to measure 0 to 1000 mbar absolute - We have a need for a general vacuum digital gauge which can display 0-1000mbar vacuum as absolute readings.
Formulas
The formulas used by this icao standard atmosphere altitude and air pressure calculator to determine each individual parameter are:
For βb ≠ 0:
P = Pb · (1 + (βb · (H – Hb) / Tb))-g / (βb · R)
H = ((((P / Pb) –βb · R / g – 1) / βb) * Tb) + Hb
For βb = 0
P = Pb · e-g · (H – Hb) / (R · Tb)
H = (ln(P / Pb) · R · Tb / -g) + Hb
ΔP = P2 – P1
ΔH = H2 – H1
Symbols
- P = Atmospheric pressure at altitude H
- ΔP = Atmospheric pressure difference from H1 to H2 altitude
- Pb = Atmospheric pressure at interfaces between atmosphere transitional layers from b = 0 to 6
- H = Geopotential altitude relative to mean sea level
- ΔH = Geopotential altitude difference from P1 to P2 atmospheric pressure
- Hb = Geopotential altitude from mean sea level of interfaces between atmosphere transitional layers from b = 0 to 6
- Tb = Reference temperature at interface between atmosphere transitional layers from b = 0 to 6
- βb = Standard temperature lapse rate to change reference temperature (Tb) between atmosphere transitional layers from b = 0 to 6
- g = Standard acceleration due to gravity = 9.90665 m/s2
- R = Specific gas constant = 287.05287 J/K·kg, constant value defined by ICAO Standard Atmosphere 1993, and derived from ideal gas law equation; P = ρ·R*·T/M0, where P = 101,325 Pa, ρ = 1.225 kg/m3, R* = 8,314.32 J/K·kmol, T = 288.15 K, M0 = 28.964420 kg/kmol), P/(ρ·T) = R* / M0 = R
Atmospheric Layer Constants
| b | Height (m) | Pressure (Pa) | Reference Temperature (K) | Lapse Rate (K/m) |
|---|---|---|---|---|
| 0 | 0 | 101,325 | 288.15 | -0.0065 |
| 1 | 11,000 | 22632.0401 | 216.65 | 0 |
| 2 | 20,000 | 5474.87742 | 216.65 | 0.001 |
| 3 | 32,000 | 868.015777 | 228.65 | 0.0028 |
| 4 | 47,000 | 110.905773 | 270.65 | 0 |
| 5 | 51,000 | 66.9385281 | 270.65 | -0.0028 |
| 6 | 71,000 | 3.95639216 | 214.65 | -0.002 |
Altitude (H)
This is the geopotential height above or below mean sea level.
Pressure (P)
This is the absolute pressure of air at a particular level in the atmosphere.
Altitude 1 (H1)
This is the initial altitude used in calculating the atmospheric pressure difference between two altitudes.
Altitude 2 (H2)
This is the final altitude used in calculating the atmospheric pressure difference between two altitudes.
Pressure Difference (ΔP = P2 – P1)
This is the atmospheric pressure difference when changing altitude from H1 to H2.
Pressure 1 (P1)
This is the initial atmospheric pressure used in calculating the altitude difference between two different elevations.
Pressure 2 (P2)
This is the final atmospheric used in calculating the altitude difference between two different elevations.
Altitude Difference (ΔH = H2 – H1)
This is the altitude difference which corresponds to the change atmospheric pressure from P1 to P2, due to a change in elevation.
Featured atmospheric pressure measurement products
Non-vented submersible absolute range pressure and barometric sensor for measuring 10m water level - Learn how to use a non-vented submersible sensor with a barometric pressure sensor for accurate water level measurement in challenging installations.- 700 to 1100 millibar scaled 4 to 20mA output pressure sensor for barometric pressure measurement - 4-20mA output transmitter for monitoring barometric pressure from 700 to 1100 mbar absolute.