0…3 mH2O or 0…10 ftH2O liquid level range, 4…20 mA, 0…10 V, or 0…5 V output signal hydrostatic liquid level sensors.
These hydrostatic liquid level sensors will measure from 0 to 3 metres of water column or 0 to 10 feet of water column liquid level ranges, and convert the measured level to a corresponding output signal from 4 to 20 milliamps, 0 to 10 volts, or 0 to 5 volts.
Utility water system OEM freshwater level transmitter for 3 metre / 10 foot depth range
DNV / GL marine certified submersible seawater level transmitter for 0-3 metre depth- 3m range 4-20mA output submersible seawater dewatering tank level sensor
- 10ft range 4-20mA output submersible sea tide depth sensor
Potable water underground 10ft dia storage tank temperature and level sensor
Fleet management system submersible 3000mm height petrol tank level ATEX rated pressure sensor
120in range 0-5Vdc output submersible river depth sensor- 3m range 4-20mA submersible freshwater tank level sensor for dust suppression systems
- Submersible 3mWG range 4-20mA output liquid level and PT1000 temperature sensor
3m range 4-20mA output submersible hot water tank level sensor- 300 cm water level sensor for submersing in tank
Swimming pool submersible pressure transmitter with 300 mbar range- Level transmitter for waste water tank 10 feet deep
- High temperature de-ionised water bath 300mm ATEX level sensor
Calibration Tables
0…3 mH2O to 4…20 mA
Use this table to determine the exact calibration points for a 0…3 metres of water column range to 4…20 milliamps output hydrostatic liquid level sensor. For additional calibration points use our 0…3 mH2O to 4…20 mA converter and enter any value.
| % Scale | 0…3mH2O | 4…20mA |
|---|---|---|
| 0 | 0.00 | 4.00 |
| 10 | 0.30 | 5.60 |
| 20 | 0.60 | 7.20 |
| 30 | 0.90 | 8.80 |
| 40 | 1.20 | 10.40 |
| 50 | 1.50 | 12.00 |
| 60 | 1.80 | 13.60 |
| 70 | 2.10 | 15.20 |
| 80 | 2.40 | 16.80 |
| 90 | 2.70 | 18.40 |
| 100 | 3.00 | 20.00 |
Request product information for a 0...3 mH2O to 4...20 mA hydrostatic liquid level sensor that matches the input and output measurement range from the calibration table above.
0…10 ftH2O to 4…20 mA
Use this table to determine the exact calibration points for a 0…10 feet of water column range to 4…20 milliamps output hydrostatic liquid level sensor. For additional calibration points use our 0…10 ftH2O to 4…20 mA converter and enter any value.
| % Scale | 0…10ftH2O | 4…20mA |
|---|---|---|
| 0 | 0.00 | 4.00 |
| 10 | 1.00 | 5.60 |
| 20 | 2.00 | 7.20 |
| 30 | 3.00 | 8.80 |
| 40 | 4.00 | 10.40 |
| 50 | 5.00 | 12.00 |
| 60 | 6.00 | 13.60 |
| 70 | 7.00 | 15.20 |
| 80 | 8.00 | 16.80 |
| 90 | 9.00 | 18.40 |
| 100 | 10.00 | 20.00 |
Request product information for a 0...10 ftH2O to 4...20 mA hydrostatic liquid level sensor that matches the input and output measurement range from the calibration table above.
0…3 mH2O to 0…10 V
Use this table to determine the exact calibration points for a 0…3 metres of water column range to 0…10 volts output hydrostatic liquid level sensor. For additional calibration points use our 0…3 mH2O to 0…10 V converter and enter any value.
| % Scale | 0…3mH2O | 0…10V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 0.30 | 1.00 |
| 20 | 0.60 | 2.00 |
| 30 | 0.90 | 3.00 |
| 40 | 1.20 | 4.00 |
| 50 | 1.50 | 5.00 |
| 60 | 1.80 | 6.00 |
| 70 | 2.10 | 7.00 |
| 80 | 2.40 | 8.00 |
| 90 | 2.70 | 9.00 |
| 100 | 3.00 | 10.00 |
Request product information for a 0...3 mH2O to 0...10 V hydrostatic liquid level sensor that matches the input and output measurement range from the calibration table above.
0…10 ftH2O to 0…10 V
Use this table to determine the exact calibration points for a 0…10 feet of water column range to 0…10 volts output hydrostatic liquid level sensor. For additional calibration points use our 0…10 ftH2O to 0…10 V converter and enter any value.
| % Scale | 0…10ftH2O | 0…10V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 1.00 | 1.00 |
| 20 | 2.00 | 2.00 |
| 30 | 3.00 | 3.00 |
| 40 | 4.00 | 4.00 |
| 50 | 5.00 | 5.00 |
| 60 | 6.00 | 6.00 |
| 70 | 7.00 | 7.00 |
| 80 | 8.00 | 8.00 |
| 90 | 9.00 | 9.00 |
| 100 | 10.00 | 10.00 |
Request product information for a 0...10 ftH2O to 0...10 V hydrostatic liquid level sensor that matches the input and output measurement range from the calibration table above.
0…3 mH2O to 0…5 V
Use this table to determine the exact calibration points for a 0…3 metres of water column range to 0…5 volts output hydrostatic liquid level sensor. For additional calibration points use our 0…3 mH2O to 0…5 V converter and enter any value.
| % Scale | 0…3mH2O | 0…5V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 0.30 | 0.50 |
| 20 | 0.60 | 1.00 |
| 30 | 0.90 | 1.50 |
| 40 | 1.20 | 2.00 |
| 50 | 1.50 | 2.50 |
| 60 | 1.80 | 3.00 |
| 70 | 2.10 | 3.50 |
| 80 | 2.40 | 4.00 |
| 90 | 2.70 | 4.50 |
| 100 | 3.00 | 5.00 |
Request product information for a 0...3 mH2O to 0...5 V hydrostatic liquid level sensor that matches the input and output measurement range from the calibration table above.
0…10 ftH2O to 0…5 V
Use this table to determine the exact calibration points for a 0…10 feet of water column range to 0…5 volts output hydrostatic liquid level sensor. For additional calibration points use our 0…10 ftH2O to 0…5 V converter and enter any value.
| % Scale | 0…10ftH2O | 0…5V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 1.00 | 0.50 |
| 20 | 2.00 | 1.00 |
| 30 | 3.00 | 1.50 |
| 40 | 4.00 | 2.00 |
| 50 | 5.00 | 2.50 |
| 60 | 6.00 | 3.00 |
| 70 | 7.00 | 3.50 |
| 80 | 8.00 | 4.00 |
| 90 | 9.00 | 4.50 |
| 100 | 10.00 | 5.00 |
Request product information for a 0...10 ftH2O to 0...5 V hydrostatic liquid level sensor that matches the input and output measurement range from the calibration table above.