All stainless steel voltage output pressure transducers for sanitary applications such as monitoring food, brewing, medicine and dairy production processes.
Signal 4-20mA
4-20mA Max. Load Resistance, Min. Tx and Power Supply Calculator
This tool will calculate the maximum load resistance, minimum power supply or transmitter supply that can be used, in order for a 4 to 20mA current loop circuit to have sufficient power to operate.
4-20mA Signal, Shunt Resistor and Volts Out Calculator
This tool will calculate the voltage drop created by adding a shunt resistor to a 4-20mA current loop signal circuit
4 to 20 mA Supply, Load, Shunt and Signal Calculator
This 4-20mA current loop signal circuit tool will calculate all the electrical parameters associated with the power supply, load resistance, transmitter supply, shunt voltage drop and current signal.
4 x 4-20mA Signal Wireless Repeater
Transmit four separate 4-20mA signals and repeat them from the receiver using four of the five available analogue outputs.
0-70mV to 4-20mA Signal Conversion
Convert a 0 to 70 millivolts range measurement input signal into a 4 to 20 milliamps loop output signal.
IWmAT 4-20mA Signal Input to Wireless Transmitter
Measure the current loop signal output from any 4 to 20 milliamp transmitter, and wirelessly transmit it to a wireless receiver hub
IWTxT Loop Powered 4-20mA Input to Wireless Transmitter
Power and measure the current loop signal output from any 4 to 20 milliamp transmitter, and wirelessly transmit it to a wireless receiver hub
IWR-5 Five Channel Wireless Sensor to 4-20mA or 1-5Vdc Output Signal Receiver
The IWR-5 is a five channel receiver designed to pair with IW series of wireless sensors and provide a 4-20mA or 1-5Vdc output signal
IWR-1 Single Channel Wireless Sensor to 4-20mA or 1-5Vdc Output Signal Receiver
The IWR-1 is a single channel receiver designed to pair with IW series of wireless sensors and provide a 4-20mA or 1-5Vdc output signal
SSTT Subsea Wet-Mateable Electrical Connector Temperature Transmitter
This RTD based temperature transmitter with subsea connector provides a 4-20mA output signal corresponding to ranges from 0…35 degC (95 degF) up to 100 degC (212 degF ).
4-20mA Output Pressure Sensors
Choose from an extensive range of pressure with a 4 to 20 milliamp current output signal.
SSPT Subsea Wet-Mateable Electrical Connector Pressure Sensor
This stainless steel ceramic sensing diaphragm based subsea connector pressure sensor provides a unamplified ratiometric millivolt output or an amplified analogue output signal corresponding to ranges from 0…1 bar (14.50 psi) up to 400 bar ( 5800 psi).
Titan TPTLRa Low Range Amplified Analogue Output Pressure Sensor
This compact stainless steel oil filled silicon piezoresistive sensor capsule based pressure transducer provides an amplified analogue output signal corresponding to ranges from 0…50 mbar (20 inWG) up to 20 bar (290 psi).
0-24V to 4-20mA Signal Conversion
Convert a 0 to 24 volts range measurement input signal into a 4 to 20 milliamps loop output signal.
Underground Mining Intrinsically Safe Pressure Transmitters
Pressure transmitters which have been approved for use with intrinsically safe installations in underground mines.
LMK 858 Plastic Submersible Liquid Level Sensor with Removable Cable
Chemical resistant liquid level sensor with detachable signal cable for measuring quantity of aggressive media such acids and alkalis and sludge in tanks located outside of factory buildings.
LMK457 Marine Approved Level Transmitter
Marine approved level transmitter with 4-20mA current loop output for shipbuilding with optional all CuNiFe construction for sea-water compatibility in ranges from 0.4 mH2O to 250mH2O gauge.
Titan TPTa Amplified Analogue Output Pressure Sensor
This compact ceramic sensing diaphragm pressure transducer provides an amplified analogue output signal corresponding to ranges from 0…0.5 bar (7.25 psi) up to 600 bar ( 8700 psi).
DMP 336 Hydrogen (H2) Gas Compatible Pressure Transmitter
All stainless steel 316L welded wetted parts pressure transmitter for measuring hydrogen gas
DPT200 High One Side Overload Differential Pressure Sensor
DP transmitter for measuring pressure difference between two pressure points which can tolerate up a very high overload pressure independently on either the positive or negative side port or both together at the same time.
Potable water underground 10ft dia storage tank temperature and level sensor
measure the level and temperature of potable water in an underground water storage tank with a 10 ft diameter and a horizontal orientation.
Fleet management system submersible 3000mm height petrol tank level ATEX rated pressure sensor
ATEX rated submersible pressure sensor for fleet management system (FMS) petrol applications .
0-50mV to 4-20mA Signal Conversion
Convert a 0 to 50 millivolts range measurement input signal into a 4 to 20 milliamps loop output signal.
0-30mV to 4-20mA Signal Conversion
Convert a 0 to 30 millivolts range measurement input signal into a 4 to 20 milliamps loop output signal.
0-20mV to 4-20mA Signal Conversion
Convert a 0 to 20 millivolts range measurement input signal into a 4 to 20 milliamps loop output signal.
HART® Liquid Level Transmitters
HART liquid level transmitters for configuration via a distributed control system (DCS) or HART communicator.
0…100 metres Liquid Level Range Sensor with 4-20mA Current Output Signal Transmitter
Measure liquid level over a 0 to 100 metres range and convert it to a 4 to 20 milliamps loop output signal.
Helium leak tested & cleaned, all welded construction 100 psig pressure sensor
This pressure sensor can be used in applications where it is necessary to ensure leaks are kept to an extremely low level and no contaminants are introduced when adding test instrumentation.
0-1V to 4-20mA Signal Conversion
Convert a 0 to 1 volt range measurement input signal into a 4 to 20 milliamps loop output signal.
32…95°F Temperature Range Sensor with 4-20mA Current Output Signal Transmitter
Measure temperature over a 32 to 95 degrees Fahrenheit range and convert it to a 4 to 20 milliamps loop output signal.
0…35°C Temperature Range Sensor with 4-20mA Current Output Signal Transmitter
Measure temperature over a 0 to 35 degrees Celsius range and convert it to a 4 to 20 milliamps loop output signal.
14…140°F Temperature Range Sensor with 4-20mA Current Output Signal Transmitter
Measure temperature over a 14 to 140 degrees Fahrenheit range and convert it to a 4 to 20 milliamps loop output signal.
-10…+60°C Temperature Range Sensor with 4-20mA Current Output Signal Transmitter
Measure temperature over a -10 to +60 degrees Celsius range and convert it to a 4 to 20 milliamps loop output signal.
32…122°F Temperature Range Sensor with 4-20mA Current Output Signal Transmitter
Measure temperature over a 32 to 122 degrees Fahrenheit range and convert it to a 4 to 20 milliamps loop output signal.
0…50°C Temperature Range Sensor with 4-20mA Current Output Signal Transmitter
Measure temperature over a 0 to 50 degrees Celsius range and convert it to a 4 to 20 milliamps loop output signal.
32…212°F Temperature Range Sensor with 4-20mA Current Output Signal Transmitter
Measure temperature over a 32 to 212 degrees Fahrenheit range and convert it to a 4 to 20 milliamps loop output signal.
0…100°C Temperature Range Sensor with 4-20mA Current Output Signal Transmitter
Measure temperature over a 0 to 100 degrees Celsius range and convert it to a 4 to 20 milliamps loop output signal.
STT-26 Submersible Temperature Probe and Transmitter
Submersible 4-20mA output sensing probe for immersion in freshwater, seawater or any other compatible liquid to measure liquid temperature.
0-100mV to 4-20mA Signal Conversion
Convert a 0 to 100 millivolts range measurement input signal into a 4 to 20 milliamps loop output signal.
-5…+5V to 4…20mA Signal Conversion
Convert a -5 to +5 volts range measurement input signal into a 4 to 20 milliamps loop output signal.
4…20mA to -5…+5V Bidirectional Signal Conversion
Convert a 4 to 20 milliamps range measurement input signal into a bidirectional -5 to +5 volts output signal.
4…20mA to -10…+10V Bidirectional Signal Conversion
Convert a 4 to 20 milliamps range measurement input signal into a bidirectional -10 to +10 volts output signal.
4-20mA to 0.5-4.5V Signal Conversion
Convert a 4 to 20 milliamps range measurement input signal into a 0.5 to 4.5 volts output signal.
0.5-4.5V to 4-20mA Signal Conversion
Convert a 0.5 to 4.5 volts range measurement input signal into a 4 to 20 milliamps loop output signal.
4-20mA to 20-4mA Signal Inversion
Invert a 4 to 20 milliamp current range measurement input signal into a 20 to 4 milliamp current output signal.
LMP305 Borehole Level Transmitter
Submersible stainless steel pressure transmitter ideal for geotechnical surveying with a 19mm diameter for measuring hydrostatic water level in bore-holes.
-10…+10V to 4…20mA Signal Conversion
Convert a -10 to +10 volts range measurement input signal into a 4 to 20 milliamps loop output signal.
Minus 30 inHg 4-20mA air pressure sensor for measuring vacuum in a sealed tank heated to 350F
A hi-temp media 200°C/392°F max gauge pressure sensor for measuring vacuum in a sealed tank heated to 350 degrees F over a range of 0 to -30 inHg g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the field housing electrical connection.
Engine test cell fuel filter 2.5 bar differential pressure sensor with ATEX approval
Sensor to measure differential pressure across fuel filters in an engine test cell on diesel and kerosene.
0-50V to 4-20mA Signal Conversion
Convert a 0 to 50 volts range measurement input signal into a 4 to 20 milliamps loop output signal.
Cargo tank -100 to +300 mbar IS SIL2 approved pressure sensor
Compound range intrinsically safe and SIL 2 approved pressure sensor for controlling the inert gas pressure in tanks containing flammable cargo.
Dairy 100 deg C wash water tank 2m range submersible level sensor
Device for level sensing in a wash water tank used for the dairy industry, which has a short term working temperature rating up to 100 deg Celsius.
Canola oil tank hygienic level sensor & indicator with high temperature protection
Instrument for measuring the level of a used Canola oil tank, and tolerate temperatures of up to 190 degrees Celsius.
Bulk powders silo fluidisation blower aeration ATEX approved HART pressure transmitter
We are looking for a HART compatible ATEX dust approved pressure transmitter for measuring the outlet pressure on blowers used for silo fluidisation when discharging bulk powder.
LMK 487 Submersible Ballast Tank and Draught Level Pressure Transmitter
A 22mm diameter titanium body seawater depth and level probe with a 4-20mA output with Lloyds and DNV-GL ship approval, for monitoring the quantity of ballast or the draft of a ship’s hull.
Floating dry dock ballast tank 14ft range 4-20mA output submersible seawater level sensor
A seawater compatible liquid level sensor for submerging in a floating dry dock ballast tank and measuring the depth over a range of 0 to 14ft from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
NPSH 4-22 psia 4-20mA filtration pump suction port pressure sensor for water treatment
An absolute pressure sensor for water treatment pump chamber use to measure filtration pump NPSH pressure of freshwater over a range of 4 to 22 psi abs from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
-10 to +10Vdc input to 4-20mA output converter for DIN rail mounting
I am looking for a voltage to current converter that can convert a +/-10V dc input to a 4-20mA output, where a 0 V dc input would result in a 12mA output.
Filtered rainwater cistern 13ft range 4-20mA submersible drinking and cooking water level sensor
A drinking water approved submersible level sensor for submerging in a filtered rainwater cistern and measuring the depth over a range of 0 to 13ft from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
Dairy farm 6m high milk storage vat 4-20mA level transmitter
A food grade externally mounted dairy level transmitter for measuring the height of milk in farm storage vats over a range of 0 to 6m from the dairy pipe process connection, and sending the corresponding 4-20mA signal through the water proof cable electrical connection.
-5…+50degC temperature and 10m range level dual 4-20mA submersible borehole transmitter
A submersible water temperature and level measurement transmitter for submerging in a borehole and measuring temperature over -5 to +50C, and depth down to 10m, from the nose cone, and sending each measurement with a separate 4-20mA signal through the submersible cable electrical connection.
Ground water flooded pit 40mH2O 4-20mA output freshwater pressure sensor for water treatment use
A ground water flooded pit gauge pressure sensor for water treatment use to measure pressure of freshwater over a range of 0 to 40 mH2O g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
SIAi-8 8 Channel Analogue Signal Input to RS-485 Modbus RTU Interface Converter
8 channel analogue signal to digital interface module for converting voltage or current signal inputs to a single RS-485 communication interface using Modbus RTU transmission protocol.
ELPO car paint plant 40ft high wastewater tank level transmitter
An externally mounted liquid level transmitter for measuring the height of wastewater from a electro-coat paint operation in a car paint plant over a range of 0 to 40ft from the G1 1/2 flush diaphragm process connection, and sending the corresponding 4-20mA signal through the weather proof cable electrical connection.
Grease trap waste receiving tank 2m range 4-20mA level transmitter
An externally mounted liquid level transmitter for measuring the height of wastewater in a grease trap waste receiving tank over a range of 0 to 2m from the G1 1/2 flush diaphragm process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
Drinking water approved 5ft range 4-20mA output submersible reservoir level sensor
A submersible water level sensor for submerging in a drinking water reservoir and measuring the depth over a range of 0 to 5ft from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
Landfill Site Leachate Level Transmitters
Sensing transmitter devices for measuring leachate level and converting it to a 4-20mA current output signal to send to other instrumentation on a landfill site used to bury waste material.
Submersible Leachate Level Transmitters
Sensing transmitter devices protected from liquid ingress when completely immersed in a leachate for measuring leachate level and converting it to a 4-20mA current output signal to send to other instrumentation.
Landfill Site Submersible Leachate Level Transmitters
Sensing transmitter devices protected from liquid ingress when completely immersed in a leachate for measuring leachate level and converting it to a 4-20mA current output signal to send to other instrumentation on a landfill site used to bury waste material.
Natural gas booster pump inlet/outlet pressure transmitters for backup power generators
Low range pressure sensors for monitoring inlet and outlet pressure of a natural gas booster pump used to raise the pressure feeding into a demand regulator which provides fixed supply pressure to fuel the back-up power generator.
Ferry hull draft monitoring 3 bar absolute 4-20mA output seawater pressure sensor
An absolute pressure sensor for ship use to measure seawater depth on a ferry hull draft monitoring system over a range of 0 to 3 bar abs from the G1 1/2" process connection, and sending the corresponding 4-20mA signal through the waterproof cable electrical connection.
Oil field equipment testing 20,000 psi g 4-20mA out freshwater pressure sensor
An intrinsically safe ultra high range pressure sensor for oil field equipment testing use to measure pressure of freshwater over a range of 0 to 20,000 psi abs from the 1⁄4 HP Tube Fitting process connection, and sending the corresponding 4-20mA signal through the 6 pin bendix electrical connection.
TPSE All-In-One Temperature Probe and Pressure Transmitter
Combined temperature probe and pressure sensor for mounting on a single pressure port to measure over a temperature range of -50 to +200C (-58 to +392F), and pressure ranges from 0…4 bar g up to 0…600 bar g.
Desalination plant seawater feed tanks 5m range 4-20mA output submersible level sensor
A marine approved submersible seawater level sensor for submerging in desalination plant water tanks and measuring the depth over a range of 0 to 5m from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
High temperature de-ionised water bath 300mm ATEX level sensor
Level sensor for high temperature liquids up to 125°C, ATEX approved intrinsically safe 4-20mA output and a low range to measure 0 to 300 millimetres.
17.620 G Low Cost Heavy Duty Compact OEM Hydraulic Pressure Sensor
Compact robust all welded stainless steel pressure sensor for heavy duty hydraulic system applications.
Food processing freshwater transfer pump 4 barg 4-20mA pressure sensor
A hygienic stainless steel flush diaphragm gauge pressure sensor for food processing pump transfer system to measure pressure of freshwater over a range of 0 to 4 bar g from the tri-clamp process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
Natural gas buffer tank 5 barg 4-20mA output natural gas pressure transmitter
An intrinsically safe gauge pressure transmitter for natural gas buffer tank use to measure pressure of natural gas over a range of 0 to 5 bar g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
Contaminated groundwater submersible plastic body 5 psi pressure transducer & display
This submersible pressure transducer and display can be used by landfill site pump techs to read leachate water level above the transducer at the well head.
IC-LTM Custom OEM Liquid Flow Axial Turbine Flowmeter
The IC-LTM is a customisable fluid flow meter which can be adapted to a oem liquid flow application with an extensive choice of mechanical process fittings, electrical connections, displays and output signals to measure flow speed or flow rate and use as a totaliser.
IC-LPM Custom OEM Liquid Flow Paddle Wheel Flowmeter
The IC-LPM is a customisable fluid flow paddle wheel flowmeter which can be adapted to a oem liquid flow application with an extensive choice of mechanical process fittings, electrical connections, displays and output signals to measure flow speed or flow rate and use as a totaliser.
5 barg range wireless pressure sensing kit for district heating monitoring use
Wireless pressure measurement kit for district heating monitoring use with a 5barg range plus a 1/4 BSP male fitting. Each pressure reading is transmitted wirelessly to a five channel base receiver, where it is converted to a 1-5Vdc or 4-20mA analogue output signal.
75psig range wireless pressure sensing kit for pneumatic monitoring and testing use
Wireless pressure measurement kit for pneumatic monitoring and testing use with a 75psig range plus a 1/4 NPT male fitting. Each pressure reading is transmitted wirelessly to a single channel base receiver, where it is converted to a 1-5Vdc or 4-20mA analogue output signal.
750psig range wireless pressure sensing kit for leak testing use
Wireless pressure measurement kit for leak testing use with a 750psig range plus a 1/4 NPT male fitting. Each pressure reading is transmitted wirelessly to a single channel base receiver, where it is converted to a 1-5Vdc or 4-20mA analogue output signal.
18.605 G Low Cost Submersible Diesel Fuel and Water Tank Level Sensor
Low cost OEM diesel fuel or water level sensor for installing inside or outside a storage tank.
DP Flow Transmitter Output Calculator
This differential pressure flow transmitter square root extraction 4 to 20 milliamp current output calculator provides a way to determine the flow output reading from the pressure drop measured across an orifice plate and the differential pressure transmitter range.
Liquid Level Transmitter 4-20mA Current Output Calculator
This liquid level transmitter 4 to 20 milliamp current output calculator provides a way to determine the output reading from the liquid level measurement and liquid level transmitter range
Flow Transmitter 4-20mA Current Output Calculator
This flow transmitter 4 to 20 milliamp current output calculator provides a way to determine the output reading from the measured flow and flow transmitter range.
Temperature Transmitter 4-20mA Current Output Calculator
This temperature transmitter 4 to 20 milliamp current output calculator provides a way to determine the output reading from the applied temperature and temperature transmitter range.
Pressure Transmitter 4-20mA Current Output Calculator
This pressure transmitter 4 to 20 milliamp current output calculator provides a way to determine the output reading from the applied pressure and pressure transmitter range.
10ft range 4-20mA output submersible sea tide depth sensor
A submersible liquid depth sensor for submerging in the sea and measuring the tide depth over a range of 0 to 10ft from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
400barg range wireless pressure sensing kit for use on rotating hydraulic clamping tools
Wireless pressure measurement kit for use on rotating hydraulic clamping tool with a 400barg range plus a 1/4 BSP male fitting. Each pressure reading is transmitted wirelessly to a single channel base receiver, where it is converted to a 1-5Vdc or 4-20mA analogue output signal.
65 inch range 4-20mA output intrinsically safe IBC tote wastewater level transmitter
An intrinsically safe externally mounted liquid level transmitter for measuring the height of wastewater over a range of 0 to 65in from the 1/2 NPT male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
30psig range wireless pressure sensing kit for production monitoring use
Wireless pressure measurement kit for production monitoring use with a 30psig range plus a 1/4 NPT male fitting. Each pressure reading is transmitted wirelessly to a five channel base receiver, where it is converted to a 1-5Vdc or 4-20mA analogue output signal.
-1 to +5 bar relative 4-20mA out low cost combined vacuum and pressure sensor
Low cost combined vacuum and pressure sensor for measuring over a -1 to +5 bar relative pressure range and generating a 4 to 20 milliamps output signal.
150 psi absolute IS 4-20mA oxygen clean pressure transducer for research use
A oxygen clean intrinsically safe absolute pressure transducer for research use to measure pressure of oxygen over a range of 0 to 150 psi abs from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
20 barg 4-20mA output 200degC steam pressure sensor for process control use
A hi-temp media 200°C/392°F max gauge pressure sensor for process control use to measure pressure of steam over a range of 0 to 20 bar g from the 1/2 BSP flush diaphragm male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
600 barg 4-20mA output wastewater pressure sensor for experimental component testing
A high range gauge pressure sensor for experimental testing use to measure pressure of wastewater over a range of 0 to 600 bar g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
600 barg freshwater booster pump pressure switch, gauge and transmitter
Digital display pressure switch, gauge and transmitter for pipe mounted use in freshwater booster pump measurement applications, capable of measuring 0 to 600 bar g pressure with 0.35% accuracy and connected using a 1/4 BSP P male fitting.