ATEX/IECEx intrinsically safe IP68 sensors for liquid level measurement in intrinsically safe installations on petrochemical, pharmaceutical, landfill and sewage treatment sites.
Intrinsically Safe
Intrinsically safe instrumentation is used in hazardous areas to prevent ignition of flammable gases that could be present in the environment surrounding the installation under certain conditions.
Hazardous Area Externally Fitted Hydrostatic Liquid Level Sensors
Hazardous area external mount level sensors for use in zones where there is a high risk of explosive gases being present.
Intrinsically Safe Pressure Switches
Electronic pressure switches that are intrinsically safe approved.
Intrinsically Safe Liquid Level Sensors
Liquid level sensors with intrinsic safety approval for measuring the level of fluid contents where flammable gas or dust is present.
Intrinsically Safe DP Sensors
Intrinsically safe differential pressure sensors with EEx certification for use in potentially explosive atmospheres with an intrinsically safe zone barrier.
Intrinsically Safe Submersible Sensor and Instrument Probes
Intrinsically safe approved IP68/NEMA 6X sensors for immersing in tanks on sites where instrumentation must be certified for use in hazardous areas contain volatile substances such as oil refineries, fuel depots, landfill sites and sewage treatment works.
Underground Mining Intrinsically Safe Pressure Transmitters
Pressure transmitters which have been approved for use with intrinsically safe installations in underground mines.
LMK457 Marine Approved Level Transmitter
Marine approved level transmitter with 4-20mA current loop output for shipbuilding with optional all CuNiFe construction for sea-water compatibility in ranges from 0.4 mH2O to 250mH2O gauge.
DMP 336 Hydrogen (H2) Gas Compatible Pressure Transmitter
All stainless steel 316L welded wetted parts pressure transmitter for measuring hydrogen gas
DPT200 High One Side Overload Differential Pressure Sensor
DP transmitter for measuring pressure difference between two pressure points which can tolerate up a very high overload pressure independently on either the positive or negative side port or both together at the same time.
Fleet management system submersible 3000mm height petrol tank level ATEX rated pressure sensor
ATEX rated submersible pressure sensor for fleet management system (FMS) petrol applications .
Engine test cell fuel filter 2.5 bar differential pressure sensor with ATEX approval
Sensor to measure differential pressure across fuel filters in an engine test cell on diesel and kerosene.
Cargo tank -100 to +300 mbar IS SIL2 approved pressure sensor
Compound range intrinsically safe and SIL 2 approved pressure sensor for controlling the inert gas pressure in tanks containing flammable cargo.
Bulk powders silo fluidisation blower aeration ATEX approved HART pressure transmitter
We are looking for a HART compatible ATEX dust approved pressure transmitter for measuring the outlet pressure on blowers used for silo fluidisation when discharging bulk powder.
LMK 487 Submersible Ballast Tank and Draught Level Pressure Transmitter
A 22mm diameter titanium body seawater depth and level probe with a 4-20mA output with Lloyds and DNV-GL ship approval, for monitoring the quantity of ballast or the draft of a ship’s hull.
Landfill Site Intrinsically Safe Pressure Transmitters
Intrinsically safe certified for use in hazardous areas. 4-20mA current loop output pressure transmitters for use on landfill sites where an area of land that is used to bury waste material.
Oil field equipment testing 20,000 psi g 4-20mA out freshwater pressure sensor
An intrinsically safe ultra high range pressure sensor for oil field equipment testing use to measure pressure of freshwater over a range of 0 to 20,000 psi abs from the 1⁄4 HP Tube Fitting process connection, and sending the corresponding 4-20mA signal through the 6 pin bendix electrical connection.
High temperature de-ionised water bath 300mm ATEX level sensor
Level sensor for high temperature liquids up to 125°C, ATEX approved intrinsically safe 4-20mA output and a low range to measure 0 to 300 millimetres.
Natural gas buffer tank 5 barg 4-20mA output natural gas pressure transmitter
An intrinsically safe gauge pressure transmitter for natural gas buffer tank use to measure pressure of natural gas over a range of 0 to 5 bar g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
IC-LTM Custom OEM Liquid Flow Axial Turbine Flowmeter
The IC-LTM is a customisable fluid flow meter which can be adapted to a oem liquid flow application with an extensive choice of mechanical process fittings, electrical connections, displays and output signals to measure flow speed or flow rate and use as a totaliser.
65 inch range 4-20mA output intrinsically safe IBC tote wastewater level transmitter
An intrinsically safe externally mounted liquid level transmitter for measuring the height of wastewater over a range of 0 to 65in from the 1/2 NPT male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
150 psi absolute IS 4-20mA oxygen clean pressure transducer for research use
A oxygen clean intrinsically safe absolute pressure transducer for research use to measure pressure of oxygen over a range of 0 to 150 psi abs from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
-3 to 4 mbar dp range 4-20mA ATEX approved biogas pressure sensor for process control use on a 1bar line
A low range differential pressure sensor for process control use to measure pressure of biogas over a range of -3 to 4 mbar diff on a 1 bar biogas line from two 1/4 NPT female process connections, and sending the corresponding 4-20mA signal through the weatherproof cable electrical connection.
1 barg IS certified 4-20mA submersible leachate pressure sensor for tank level gauging use
An intrinsically safe submersible wastewater gauge pressure sensor for tank level gauging use to measure pressure of leachate over a range of 0 to 1 bar g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
6,000 psig ATEX/IECEx IS approved 4-20mA pressure sensor for oil pumping use
An intrinsically safe all welded stainless steel gauge pressure sensor for oil pumping use to measure pressure of pumped oil over a range of 0 to 6,000 psi g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the weatherproof cable electrical connection.
-1 to 20 bar g compound range IS 4-20mA propane pressure sensor for process control use
An intrinsically safe compound range pressure sensor for process control use to measure pressure of propane gas over a range of -1 to 20 bar g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
40 inH2O g peak/valley storing pressure gauge for monitoring gas feed fluctuations
Low range intrinsically safe digital display pressure gauge for pipe mounted use in natural gas measurement applications on feeds to industrial gas boiler, capable of measuring 0 to 40 inH2O g pressure with 0.25% accuracy and connected using a 1/4 NPT male fitting. Also includes USB and peak & valley reading hold.
1 mbar range 4-20mA output biogas pressure transmitter for controlling blower fan connected to a covered lagoon
An intrinsically safe very low range pressure transmitter to measure pressure of biogas under covered lagoon to control a blower fan, over a range of 0 to 1 mbar g from the 1/4 inch NPT female tapered thread process connection, and sending the corresponding 4-20mA signal through the terminal clamps and M20 x 1.5 cable gland electrical connection.
1 inH2O differential intrinsically safe 4-20mA out air pressure sensor for HVAC use
A low range intrinsically safe pressure sensor for HVAC use to measure pressure of air over a range of 0 to 1 inH2O differential from two G1/4 female process connections, and sending the corresponding 4-20mA signal through the M20 x 1.5 cable gland electrical connection.
20 inH2Og range 4-20mA output natural gas pressure transducer for commercial generator use
An intrinsically safe low gauge range pressure transducer for use on commercial generators to measure pressure of natural gas over a range of 0 to 20 inH2O g from the 1/2 NPT male process connection, and sending the corresponding 4-20mA signal through the weatherproof cable electrical connection.
100 psig range landfill leachate pressure gauge with 4-20mA output for SCADA sytem
Intrinsically safe analogue output signal pressure gauge for pipe mounted use in leachate measurement applications, capable of measuring 0 to 100 psi g pressure with 0.5% accuracy and connected using a 1/4 NPT male fitting. Also includes 4-20mA for linking to a SCADA system.
-10…30 kPa g compound range inert gas pressure transmitter for ship IG system
An intrinsically safe, marine approved compound range pressure transmitter for ship cargo tank IG system use to measure pressure of inert gas over a range of -10 to 30 kPa g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
400 kg/cm2 g range pipe mounted digital display air pressure gauge with 1/4 NPT male fitting
Digital display pressure gauge for pipe mounted use in air measurement applications, capable of measuring 0 to 400 kg/cm2 g pressure with 0.1% accuracy and connected using a 1/4 NPT male fitting. Also includes IS approval.
50in range 4-20mA output chemical liquid level sensor with flush diaphragm and IS approval
An intrinsically safe externally mounted liquid level sensor for measuring the height of a liquid chemical over a range of 0 to 50in from the triclamp process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
50000 psig 4-20mA mineral hydraulic oil pressure sensor for chemical processing use
An intrinsically safe ultra high range pressure sensor for chemical processing use to measure pressure of mineral hydraulic oil over a range of 0 to 50,000 psi g from the 9/16 UNF female process connection, and sending the corresponding 4-20mA signal through the integral cable electrical connection.
700 barg natural gas high range pressure gauge logger with 1/2 NPT male fitting
Digital display high pressure gauge for pipe mounted use in natural gas measurement applications, capable of measuring 0 to 700 bar g pressure with 0.1% accuracy and connected using a 1/2 NPT male fitting. Also includes USB, logger, log software and cal cert.
50mbarg range 4-20mA output petrol fill level pressure sensor for automotive testing use
An intrinsically safe gauge pressure sensor for automotive component testing use to measure fill level pressure of petrol over a range of 0 to 50 mbar g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
Intrinsically safe 10 barg range 4-20mA output natural gas pressure sensor
A intrinsically safe gauge pressure sensor for industrial natural gas monitoring use to measure pressure of natural gas over a range of 0 to 10 bar g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
30 to 300 psig natural gas HART 4-20mA pressure sensor for oil and gas use
A HART coms gauge pressure sensor for oil & gas industry use to measure pressure of natural gas over a range of 30 to 300 psi g from the 1/2 NPT male process connection, and sending the corresponding 4-20mA signal through the field housing screw terminals electrical connection.
50 psig range hydrocarbon gases pressure gauge with 1/2 NPT male fitting
Digital pressure gauge for pipe mounted use in Hydrocarbon gas measurement applications, capable of measuring 0-50 psi g pressure to 0.5% accuracy and connected using a 1/2 NPT male fitting. Also includes cal cert and IS approval.
ATEX rated room ±100 Pa differential pressure transmitter
Differential pressure transmitter with a -100 to +100 Pascal range for measuring the difference in pressure between the inside and the outside of a room, in an ATEX zone.
Wastewater holding tank submersible 8 feet deep level monitoring pressure transmitter
Submersible pressure transmitter with a flush diaphragm & intrinsic safety approval for measuring the level of wastewater in a holding tank which is 8 feet high.
Rangeable fuel and freshwater submersible level sensor for ship tanks up to 1.6m high
Ship approved tank contents level sensor with adjustable range for measuring the amount of stored fuel.
DMP 335 All Welded Stainless Steel Diaphragm Pressure Sensor
All welded stainless steel diaphragm pressure sensor for mobile hydraulics, refrigeration or oxygen applications. This pressure sensor is available in the ranges from 6 bar up to 600 bar gauge with a 4-20mA or 0-10Vdc output signal.
DMK 458 Seawater Low Range Pressure Transmitter
Sea water corrosion resistant low range pressure transmitter for marine, ship and offshore engineering.
LMP 308 Removable Waterproof Cable Connection Water Level Sensor
Groundwater, tank & reservoir water level detachable submersible cable hydrostatic liquid level sensor for multiple municipal water level measurement locations.
Hydraulic Testing Intrinsic Safety Approved Pressure Data Loggers
Hydraulic system & components testing, intrinsic safety (IS) zone approved operation, pressure reading data storage logger.
Low Pressure Range Intrinsically Safe Pressure Transmitters
4-20mA current loop output pressure transmitters with intrinsically safe (IS) certification, and low pressure scale operating range.
DPT200 Pressurised Tank Level Differential Pressure Transmitter
Pressurised tank liquid level differential pressure cell transmitter for process plant storage.
Barometric range 800-1100mb IECEx approved intrinsically safe pressure transmitter
Measure pressure of the ambient air pressure with this barometric scaled range pressure transmitter.
Landfill biogas extraction well depressure pressure transmitter
Monitor the suction pressure at the top of a biogas vertical extraction well in a landfill site.
Powder filter blockage monitoring pressure transmitter
The DMP331 is a pressure transmitter which is both ATEX and IECEx intrinsically safe approved for use in zone 20 potentially explosive dust environments.
KX ATEX Intrinsically Safe SIL2 Approved Pressure Sensor
The Gefran KX pressure sensor is ATEX approved for use with intrinsic safety barriers in hazardous areas, and is SIL 2 approved for additional safety. The KX is available in ranges from -1 to 1 bar up to 1000 bar.
Intrinsically Safe Pressure Gauges
Intrinsically safe pressure gauges which are Ex certified for use in areas where flammable or explosive substances are stored or processed.
Intrinsically Safe Pressure Data Loggers
Intrinsically safe (IS) pressure data loggers which can be used in potentially explosive environments such as oil refineries, offshore oil platforms and natural gas distribution.
Military connector ATEX 400 bar hydraulic pressure transmitter
Hydraulic pressure transmitter with a 6 pin military style electrical connector for intrinsically safe installations.
Low range ATEX approved 100 Pascal range DP transmitter
The DPT200 is a robust ATEX approved differential pressure transmitter which has a very low range of 100Pa.
Intrinsically Safe Pressure Transmitters
Choose an intrinsically safe pressure transmitters with a 4 to 20 milliamp output which is certified for use as part of an intrinsically safe installation.
DMP343 Low Range Pneumatic Pressure Sensor
DMP343 pneumatic pressure sensor for measuring very low range pressures on pneumatic control systems, heating, ventilation and air conditioning systems (HVAC) .
Anaerobic digestion methane gas 2bar pressure transmitter
ATEX pressure transmitter to measure the pressure of methane gas line in an anaerobic digestion plant.
Data logger for ATEX zone 1 area to measure up to 5000 psi
I am looking for a data logger that is ATEX approved for zone 1, battery operated, have ample memory, sample every second, and pressure range to 5kpsi
LEO Record (Ei) Pressure Data Logger
LEO Record combined digital manometer & pressure data logging instrument for recording pressures & temperatures that can store up to 57,000 readings.
LEX1 (Ei) High Accuracy Digital Pressure Gauge
High precision digital pressure gauge with an accuracy of 0.05% full scale in pressure ranges from 0…30 mbar up to 0…1000 bar.
RS485 coms 700 bar pressure sensor with intrinsic safety approval
700 bar digital pressure sensor with a RS485 digital interface which has been ATEX certified for inclusion in an intrinsically safe installation.
LEO 2 (Ei) Digital Manometer
LEO 2 battery powered digital manometer with pressure ranges from -1 to 3 bar up to 700 bar with an accuracy of 0.1% full scale with 6 pressure units, zero tare & peak hold display functions and optional ATEX approval for intrinsic safety.
5 to 20 psi absolute ambient 4 to 20 ma pressure transmitter
DMP331 can be custom scaled and calibrated during manufacture to your specified barometric range of 5 to 20 psi absolute.
500 kPa absolute intrinsically safe pressure transmitter
Intrinsically safe pressure transmitter, 0 to 500 kpa a, 1/2 BSP male, media temp –40 to 125°C, ATEX approval, stainless steel and output range 4-20ma
DMK351 Liquid and Gas Resistant Intrinsically Safe Low Range Gauge Pressure Sensor
Intrinsically safe liquid & gas resistant low range pressure gauge reference pressure sensor for CHP, biogas and landfill sites.
Glycol/Water mixture peak pressure gauge to measure up to 15 bar
The LEO1 pressure gauge has a peak hold function and two modes of operation which captures twice a second or 5,000 times per second.
35X HTC High Temperature Digital Pressure Sensor (< 300 degC)
The 35X HTC high temperature digital pressure sensor is suited for media temperatures up to 300 °C
ADT681 Digital Pressure Gauge
The ADT681 digital pressure gauge family covers a wide range of pressures from as low as 1 inH20 differential to as high as 36,000 psi gauge.
Portable recorder to log pressures up to 100 psi in hazardous area
The DM01 has internal data recording capability and is ATEX approved for use in hazardous areas.
DS200 Combined Pressure Switch, Gauge and Sensor
Three in one electronic pressure switch, digital pressure gauge and pressure sensor with pressure ranges from 100 mbar up to 600 bar (1.5 to 9000 psi).
DMP331 Precision Pressure Transmitter
Stainless steel pressure transmitter with ranges from 100mbar up to 40 bar gauge or absolute. Special options for ATEX , SIL2 and compound ranges.
LMK307 Submersible Waste Water Level Sensor
Submersible waste water level sensor with optional intrinsic safety certification for monitoring the level of sewage and effluent in water treatment plants.
DMK331P Flush Diaphragm Pressure Sensor
Screw-in pressure transmitter with flush stainless steel 316L diaphragm for measuring pressures of fluids with very high viscosity from 900 up to 6000 psi
LMK351 High Overpressure Flush Level Transmitter
Flush capacitive ceramic pressure sensor for measuring corrosive and viscous liquid level from levels 0.4 metres of water up to 200 mH2O.
LEO1 (Ei) Digital Pressure Gauge
Battery powered digital gauge with an accuracy of 0.1% full scale in pressure ranges from -1 to 3 bar up to 1000 bar.
LMK331 Screw-In Ceramic Level Transmitter
Level pressure sensor with semi-flush ceramic diaphragm and stainless steel or PVDF wetted parts in ranges from 0-4 to 600mH2O gauge.
DMP331P Hygienic Flush Pressure Transmitter
Sanitary pressure sensor wth exposed diaphragm with no crevices for high temperatures up to 300 Degrees Celsius in ranges from 100mb up to 40 bar gauge or absolute
Intrinsic Safety
A guide to intrinsic safety measurement instrumentation including explanations, applications and choice of products for installing in hazardous areas.
DMP331i High Accuracy Pressure Transmitter
High precision pressure transmitter with an accuracy of 0.1%FS BSL NLHR and digitally adjustable pressure ranges from 400mb up to 40 bar gauge & absolute.
DM01-500-HD High Range Digital Pressure Gauge
The DM01-500 HD high range pressure gauge is available in pressure ranges from 0 to 600, 1000, 1600, 2000 & 2200 bar.
Marine and IS approved, -1 to 3 mWG compound range pressure transmitter
Pressure transmitter with Marine type approvals and a compound pressure range of -1000 to +3000 mWG.
DMK 331 Ceramic Diaphragm Industrial Pressure Transmitter
This pressure transmitter can be supplied with a PVDF process connector so that it can be used to measure the pressure of acids and other corrosive chemicals.
Vacuum range manometer for leak testing in hazardous areas
Intrinsically safe manometer which can read from a few mbar absolute to atmospheric pressure for investigating vacuum leaks.
Measuring level of stoddard solvent in a sealed tank
We are trying to measure pressure in a gas tank filled with stoddard solvent.
30 ounces per square inch range pressure gauge with built-in logger
Pressure gauge with range from 0 to 30 oz/sq in, with intrinsically safe certification, which can record pressure readings
300 psi intrinsically safe digital pressure gauge
Digital pressure gauge for measuring 0-300 psi which is intrinsically safe for use in potential flammable zones.
Combined readout and transmitter for measuring up to 250 bar Methane gas
Local display mounted on a sensor with a two wire 4 to 20mA signal running out to measure the pressure of a 250 bar methane gas supply line.
Barometric 550 to 1150 hPa abs high resolution pressure transmitter
High precision barometric pressure transmitter for measuring atmospheric pressure from 550 hPa to 1150 hPa absolute.
Leachate holding tank, submersible level sensor for 5 meter depth
Pressure sensor for measuring leachate in a holding tank which has a ATEX rated 4-20mA output and a range from 0 to 5 meters sensing depth plus 10m of cable.
Self powered +/- 1 psi g hazardous area pressure recorder
Self powered pressure recorder that can accurately measure -1 psig to +1 psig, with a 1/2 NPT male pressure connector adapter and ATEX hazardous area classification equivalent to Class 1 Zone 1.
Immersible sewage level transmitter for pressures up to 15 psi
Pressure sensor that can be used can be immersed in sewage to measure level up to 15 psi gauge.
Immersible sewage level transmitter for pressures up to 5 psi
Pressure sensor that can be used can be immersed in sewage to measure level up to 5 psi gauge.
15,000 psi intrinsically safe high pressure logger
Pressure data logger with internal battery and memory for use in oil and gas applications to measure pressures up to 15,000 psi.
1 metre deep raw sewage ATEX approved submersible level transmitter
Submersible flush diaphragm raw sewage level transmitter for measuring levels of wastewater up to 1 metre in depth.
+/-100 millibar digital manometer recorder with ATEX approval
Atex certified digital manometer with a pressure range of -100 to +100 mbar gauge with data recording, software and a data port to connect to a PC.
Minus 15 psi gauge intrinsically safe pressure transmitter
Negative range gauge reference pressure transmitter for measuring vacuum from 0 to -15 psi gauge.
30 bar g or abs calibration pump kit with Ex approved test gauge
Field calibration test kit for accurately generating and verifying gauge or absolute pressures up to 30 bar.