We are looking for a 10 bar pressure transducer to be installed on a pump project. We are looking for a pressure transducer indicator type with ATEX certification for intrinsic safety. Also we require three in one option i.e. pressure transducer / pressure gauge / pressure switch.
The Ds200 is a 3in1 pressure transducer and gauge with a pnp switch output. For ATEX approval it would have to be a 4-20mA current loop for the transducer output signal.
DS200 3in1 Pressure Transducer, Gauge & Switch
- Pressure Range: 10
- Units: bar
- Range Type: Positive Gauge (atm to +P)
- Output Signal: 4-20mA, ATEX IS, (2 wire)
- Accuracy: 0.35%FS >= 0.4 bar, 0.5% < 0.4bar (11-12bit resolution)
- Switch Output: 1 PNP switch
- Electrical Connection: Integral cable gland with 2m of cable
- Process Connection: 1/2 NPT male
- Process Connector Material: Stainless steel 316L
- Diaphragm Material: Stainless steel 316L
- Media Exposed Seals: FKM